Lista przedmiotów z materiałami udostępnionymi dla studentów

Dla_studentów
  • Increase font size
  • Default font size
  • Decrease font size

Małgorzata Arendt

Ocena sterylizacji przemysłowej podłoży ze stali AISI 316L pod kątem odpowiedzi biologicznej


Evaluation of industrial sterilization of AISI 316L stainless steel substrates in the field of biological response


Opiekun pracy dyplomowej: dr hab. inż. Dorota Bociąga prof. ucz.
Dodatkowy opiekun pracy dyplomowej: mgr inż. Urszula Borowska-Skarzyńska

Praca dyplomowa inżynierska obroniona 2019-02-25
Streszczenie pracy dyplomowej:
Metale to biomateriały najczęściej używane do produkcji implantów – na przykład w zakresie ortopedii lub kardiochirurgii. Ponadto większość z implantów metalicznych jest wykonana ze stali medycznej. Przed implantacją materiały mogą zostać poddane modyfikacjom powierzchni, które są stosowane aby poprawić właściwości mechaniczne biomateriału lub by zwiększyć biokompatybilność. Wśród możliwości procesów przeprowadzanych na powierzchni próbki można wymienić powłoki i sterylizację. Celem tej pracy była ocena wpływu sterylizacji przemysłowej na stal nierdzewną AISI 316LVM. Aby sprawdzić oddziaływanie na powierzchnię, na próbkach dostarczonych przez firmę Medgal zostały przeprowadzone następujące badania: obserwacja mikroskopowe z analizą składu chemicznego, pomiar chropowatości powierzchni, obliczenia swobodnej energii powierzchniowej i test Live/Dead, który umożliwia ocenę odpowiedzi biologicznej. Badania dowiodły, że zarówno powłoki jak i sterylizacja zmieniają właściwości powierzchniowe. Sterylizacja wpłynęła na chropowatość powierzchni, swobodną energię powierzchniową, jak i skład chemiczny próbek. Naniesione powłoki obniżają stopień proliferacji komórek, ale pozostają biokompatybilne. Słowa kluczowe: AISI 316LVM, sterylizacja przemysłowa, odpowiedź biologiczna.
Abstract:
Metals are the most commonly used biomaterials to produce implants - for example in the field of orthopedics or cardio surgery. Moreover the majority of these are made of the austenitic stainless steel. Before the implantation, the materials may undergo the surface modifications, which are used either to improve the mechanical properties of the biomaterial or to increase its biocompatibility. Among the processes performed on the surface of the sample coatings or sterilization can be listed. The aim of this thesis was to verify the influence of the industrial sterilization on the AISI 316LVM stainless steel. To evaluate the impact on the surface the following examinations were performed on the samples provided by Medgal Company: microscopic observation with the analysis of chemical composition, surface roughness measurement, surface free energy calculations and Live/Dead test, which enables the assessment of the biological response. The examination proved, that both, the coatings and sterilization change the surface properties. Sterilization changed the surface roughness, surface free energy as well as the chemical composition of the samples. The coatings decreased the proliferation degree, but they remain biocompatible. Keywords: AISI 316LVM, Industrial sterilization, Biological response.